FLEXADOME
Fast and practical system to realize three-dimensional tags and labels. It uses the Flexadome environmentally friendly UV single-component resin, not dangerous for the user. Innovative doming system to give a nice and brilliant 3D effect fnishing to PVC labels, adhesive media and other traditionally printed materials
COD. 123456789
3D EFFECT GUARANTEED, PROFESSIONAL RESULTS
- Innovative doming system to give a nice and brilliant 3D effect finishing to PVC labels of any shapes and dimensions, adhesive media and other traditionally printed materials
- How it works: the Flexadome UV single-component resin is applied on the material through the dispenser and is dried thanks to UV lamps of the oven
- Time saving: you just need to press a button to start-up and shutdown the system
- No waste of resin, nozzles and scraps of plastic cartridges
- Excellent flexibility of the product treated with resin even for a subsequent application on curved surfaces
- Easy-to use and safe for the operator, no need of cleaning at the end of the job, no need of maintenance
AVAILABLE IN TWO CONFIGURATIONS:
1. ADVANCED SYSTEM:
Suitable for professional use and large production. Composed of: UV oven, 2 trays, computerized dispenser
2. DEMO KIT:
Starter kit suitable for testing the system. Composed of: mini UV dryer, 1 siringe UV block, resin (1/2 kg)
NEW FLEXADOME UV SINGLE-COMPONENT RESIN
- Ready to use, no mixing of components required
- Improved transparency with lens effect guaranteed
- Greater versatility due to higher insensitivity to ambient light. It is advisable to work in environments protected from direct sunlight
- Dries even faster with improved curing even at high thicknesses
- Average yield per cm2: about 0,2 gr.
- More resistant to yellowing
- Exellent moisture resistance with no bubbles formation
- Can be stored up to 12 months in the original sealed can, keeping the same density
- Reduced odor intensity for the operator's benefit
- Free of components considered toxic in line with the latest European regulations
SUITABLE
MATERIALS:
- PVC or polyester labels
- Adhesive media
- Metal dog tags
- Pins
- Printed materials
- Many more..
Flexadome
Uv doming system
-
Easy-to-use timer
Easy-to-use timer to set the parameters of drying cycle
-
Multifunction digital timer
Multifunction digital timer that acquires time and dosage parameters for each specifc type of label (Advanced System)
-
Long life UV lamps
Long life UV lamps
-
Start command controlled
Start command controlled by foot pedal
-
Resin Dispenser
Resin Dispenser with room for 1 kg UV resin can
-
Trays with magnetic label holders
Two trays (standard supply) complete with magnetic label holders
Flexadome Technical specs
| FLEXADOME | |
|---|---|
| Maximum width of the sheet for the UV Oven | 300 x 400 mm (12 x 16 in.) |
| Oven dimensions (W x D x H) | 850 x 460 x 300 mm (33 x 18 x 12 in.) |
| Oven Supply | 230/240 V- 50/60 Hz - 150 W |
| Oven weight | 40 kg (88 lb.) |
| Maximum pression of the Dispenser | 6 bar |
| Dispenser supply | 230/240 V- 50/60 Hz - 100 W |
| Dispenser dimensions (W x D x H) | 330 x 260 x 600 mm (13 x 10 x 23 in.) |
| Dispenser weight | 4 kg (9 lb.) |
| Total packing dimensions Oven + Dispenser (W x D x H) |
1050 x 750 x 900 mm (41 x 29 x 35 in.) |
| Total weight Oven + Dispenser | 50 kg (110 lb.) |
FLEXA S.R.L.
Via dell’Industria, 1131014 Colle Umberto (TV)
ITALY
SOCIAL CAPITAL: 100.000,00 E I.V.
VAT N. 02476190265
CF 01211830938
REA TV212712
LEGAL MAIL: amministrazione@pec.flexa.it