MIURA
COD. 123456789
High performing cutting machine with rotating blades for X and Y trimming of flexible materials from roll to sheets. It combines horizontal and vertical cutting for the fastest finish for your printed and unprinted rolls.
Miura cuts one roll of 50 meters (164 ft) in less than 5 minutes.
It is easy to use thanks to the intuitive set up of cutting parameters through the touch screen display.
This xy cutter can be connected to the internet network for an efficient remote assistance, saving time and money.
PERFECT CUT,
MAXIMUM SPEED
- Combined horizontal and vertical cutting for the fastest finish for your printed and unprinted rolls
- High performing trimmer: cut one roll of 50 meters (164 ft.) in less than 5 minutes
- Precise cutting: trimmed images perfectly square every time
- The lengthwise rotary crush cutters are safe for the operator, last for 100's of thousands of cuts with low costs of maintenance. No need of special cleaning after cutting adhesive media as they create a “dry,” non-sticky edge
- 3 operation modes: crop mark (useful to trim multiple printing sizes from the same roll), automatic and manual
- Intuitive set up parameters thanks to the user-friendly software (LCD touch screen display). The MUTING function avoids misreading of hidden marks on the printed media
- Intuitive set up parameters thanks to the user-friendly LCD touch screen control panel
- Long term reliability and safety combined with low maintenance costs
- Ready to use, no need of air compressor
- Smart Remote Service: Miura can be connected to the internet network for remote assistance, for fast and efficient diagnostics
MATERIALS
- Paper - Also laminated or encapsulated
- Wallpaper
- Vinyl & self adhesive vinyl
- Backlit & frontlit display
- Reflective material
- PVC banner (up to 900 gr/m2 - 27 oz./ya2)
- Magnetic rubber
- Polycarbonate (film)
- Canvas & polyester (with liner)
- Many more..
Miura
High performing cutting machine with rotating blades for X and Y trimming of flexible materials from roll to sheets
-
Cutting mark reader
Advanced cutting mark reader
-
Lengthwise rotary crush cutter
Single lengthwise rotary crush cutter (twin cutters optional)
-
Unwinding shaft brake
Unwinding shaft brake for adjusting the tension of the material
-
Aluminium shaft with flanges
Aluminium 3”shaft with flanges for the right alignment of the roll
-
NEW Heavy duty unwinding shaft
Heavy duty unwinding shaft for rolls Ø 400 mm up to 90 kg weight (optional)
-
Fine pressure adjustment
Fine pressure adjustment (according to the types of material)
-
Fine positioning of the cutting blades (optional)
Fine positioning of the cutting blades
-
Adjustable unwinding shaft (optional)
Adjustable unwinding shaft
-
NEW - Steel magnet output plates
To make easier the output of the finish cut sheets. Easy to move in the needed position thanks to the magnet (optional)
-
Display design
Intuitive set up parameters thanks to the new designed user-friendly LCD touch screen
-
MUTING function
It avoids possible misreading of hidden marks
-
Adjustable collecting table (optional)
-
Motorized Stacker in line with the cutter
Motorized Stacker in line with the cutter: height and inclination electronically adjustable; extensible length up to 3,1 meters (optional)
-
NEW Tiltable collecting table with wheels
Miura can be fitted with a compact tiltable collecting table with wheels (optional)
-
Front rewinding system
It rewinds the cut roll up to 3 smaller rolls. Equipped with speed regulator and indipendent clutches (optional)
Miura Technical Specs
| MIURA 160 | MIURA 210 | MIURA 265 | |
|---|---|---|---|
| Working width | 1650 mm (65 in.) | 2150 mm (84 in) | 2650 mm (105 in.) |
| Maximum cutting thickness | 1,2 mm (0,04 in.) | 1,2 mm (0,04 in.) | 1,2 mm (0,04 in.) |
| Max. roll diameter | 300 mm (12 in.) | 300 mm (12 in.) | 300 mm (12 in.) |
| Feeding speed | 1 - 30 m/min. (3 - 98 ft./min.) | 1 - 30 m/min. (3 - 98 ft./min.) | 1 - 30 m/min. (3 - 98 ft./min.) |
| Max. roll weight | 60 kg (132 lb.) | 60 kg (132 lbs) | 60 kg (132 lbs) |
| Power Supply | 230 V - 50 Hz - 650 W | 230 V - 50 Hz - 650 W | 230 V - 50 Hz - 650 W |
| Cross cutting speed | 5 - 120 m/min. (16 - 393 ft./min.) | 5 - 120 m/min. (16 - 393 ft./min.) | 5 - 120 m/min. (16 - 393 ft./min.) |
| Usable cutting units | Max. 8 | Max. 8 | Max. 8 |
| Dimensions (W x L x H) | 2460 x 970 x 1330 mm (96 x 39 x 52 in) | 2960 x 970 x 1330 mm (116 x 39 x 52 in) | 3460 x 970 x 1330 mm (136 x 39 x 52 in) |
| Weight | 330 kg (727 lbs) | 370 kg (815 lbs) | 430 kg (947 lbs) |
| Packing dimensions (W x L x H) | 2650 x 1150 x 1650 mm (104 x 45 x 65 in) | 3250 x 1250 x 1700 mm (128 x 49 x 67 in) | 3750 x 1250 x 1700 mm (147 x 49x 67 in) |
| Packing weight | 415 kg (914 lbs) | 540 kg (1190 lbs) | 628 kg (1384 lbs) |
Supported RIPs
FLEXA S.R.L.
Via dell’Industria, 1131014 Colle Umberto (TV)
ITALY
SOCIAL CAPITAL: 100.000,00 E I.V.
VAT N. 02476190265
CF 01211830938
REA TV212712
LEGAL MAIL: amministrazione@pec.flexa.it