MIURA PLUS
COD. 123456789
High performing cutting machine for X and Y trimming of flexible materials with automatic vertical cutting correction. It combines horizontal and vertical cutting for the fastest finish for your printed and unprinted rolls.
The edge control guarantees a perfect straight cutting of the media roll.
Miura Plus cuts one roll of 50 meters (164 ft) in less than 5 minutes
ABSOLUTE SPEED AND
CUTTING PRECISION
- Combined horizontal and vertical cutting for the fastest finish for your printed and unprinted rolls
- Extremely high precision is ensured thanks to the automatic edge control that reads either the line longitudinally printed or the material's edge along the entire length of the roll guaranteeing a perfect straight cutting of the media roll
- High performing trimmer: cut one roll of 50 meters (164 ft.) in less than 5 minutes
- The lengthwise rotary crush cutters are safe for the operator, last for 100's of thousands of cuts with low costs of maintenance. No need of special cleaning after cutting adhesive media as they create a “dry,” non-sticky edge
- 3 operation modes: crop mark, custom (sheeting) and manual. Miura can trim different lenghts from the same printed roll
- Intuitive set up parameters thanks to the user-friendly software (LCD touch screen display). The MUTING function avoids misreading of hidden marks on the printed media
- Intuitive set up parameters thanks to the user-friendly LCD touch screen control panel
- Long term reliability and safety combined with low maintenance costs
- Ready to use, no need of air compressor
- Smart Remote Service: Miura can be connected to the internet network for remote assistance, for fast and efficient diagnostics
SUITABLE
MATERIALS
- Paper - Also laminated or encapsulated
- Wallpaper
- Vinyl & self adhesive vinyl
- Backlit & frontlit display
- Reflective material
- PVC banner (up to 900 gr/m2 - 27 oz./ya2)
- Magnetic rubber
- Polycarbonate (film)
- Canvas & polyester (with liner)
- Many more..
Miura Plus
High performing cutting machine for X and Y trimming of flexible materials with automatic vertical cutting correction
-
Control panel
Automatic vertical alignment control panel
-
Optical sensor for vertical alignment
Optical sensor for vertical alignment
-
Advanced cutting mark reader
Advanced cutting mark reader
-
Positioning of the cutting blades
Fine positioning of the cutting blades (Optional)
-
Pressure adjustment
Fine pressure adjustment (according to the types of material)
-
SIngle lenghtwise rotary crush cutter
Single lenghtwise rotary crush cutter (twin cutters Optional)
-
Slimline lengthwise crush cutter
Slimline lengthwise rotary crush cutter, single or twin (optional)
-
Display design
Intuitive set up parameters thanks to the new designed user-friendly LCD touch screen
-
MUTING function
It avoids possible misreading of hidden marks
-
Steel magnet output plates
To make easier the output of the finish cut sheets. Easy to move in the needed position thanks to the magnet (optional)
-
Pull-out waste basket
Clean working area thanks to the big waste basket
-
Front rewinding system
It rewinds the cut roll up to 3 smaller rolls. Equipped with speed regulator and indipendent clutches (optional)
-
Motorized Stacker in line with the cutter
NEW Motorized Stacker in line with the cutter: height and inclination electronically adjustable; extensible length up to 3,1 meters (optional)
-
Adjustable collecting table
Adjustable collecting table (Optional)
-
Tiltable collecting table with wheels
It can be fitted with a compact tiltable collecting table with wheels (optional)
Miura Plus Technical Specs
| MIURA PLUS 160 | MIURA PLUS 210 | MIURA PLUS 265 | |
|---|---|---|---|
| Working width | 1650 mm (65 in.) | 2150 mm (84 in) | 2650 mm (105 in.) |
| Maximum cutting thickness | 1,2 mm (0,04 in.) | 1,2 mm (0,04 in.) | 1,2 mm (0,04 in.) |
| Feeding speed | 1 - 30 m/min. (3 - 98 ft./min.) | 1 - 30 m/min. (3 - 98 ft./min.) | 1 - 30 m/min. (3 - 98 ft./min.) |
| Usable cutting units | Max. 8 | Max. 8 | Max. 8 |
| Cross cutting speed | 5 - 120 m/min. (16 - 393 ft./min.) | 5 - 120 m/min. (16 - 393 ft./min.) | 5 - 120 m/min. (16 - 393 ft./min.) |
| Max. roll diameter | 300 mm (12 in.) | 300 mm (12 in.) | 300 mm (12 in.) |
| Max. roll weight | 60 kg (132 lb.) | 60 kg (132 lb.) | 60 kg (132 lbs) |
| Power Supply | 230 V - 50 Hz - 650 W | 230 V - 50 Hz - 650 W | 230 V - 50 Hz - 650 W |
| Dimensions (W x L x H) | 2460 x 1000 x 1330 mm (96 x 39 x 52 in) | 2960 x 1000 x 1330 mm (116 x 39 x 52 in) | 3460 x 1000 x 1330 mm (136 x 39 x 52 in) |
| Packing dimensions (W x L x H) | 2650 x 1150 x 1650 mm (104 x 45 x 65 in) | 3250 x 1250 x 1700 mm (128 x 49 x 67 in) | 3750 x 1250 x 1700 mm (147 x 49 x 67 in) |
| Weight | 415 kg (881 lbs) | 460 kg (1014 lbs) | 530 kg (1168 lbs) |
| Packing weight | 500 kg (1102 lbs) | 630 kg (1388 lbs) | 728 kg (1604 lbs) |
FLEXA S.R.L.
Via dell’Industria, 1131014 Colle Umberto (TV)
ITALY
SOCIAL CAPITAL: 100.000,00 E I.V.
VAT N. 02476190265
CF 01211830938
REA TV212712
LEGAL MAIL: amministrazione@pec.flexa.it